nistune type 3 board with adaptor a for 95 b14 sr20de ecu

[rob_96]

hello

i was just wondering has anyone installed a type 4 board and serial a connector in to a b14 ecu..... the install on nistune does not show row of 40 pin i need to connect to. and the rows are woo1,woo2,woo3(has 26pins)
here is a pic of what i am talking about

http://i751.photobucket.com/albums/xx15 ... NY0422.jpg

any pics will help

cheers

rob

[bakgwailo]

have you come up with a board design for the s14/ODB2 ecus? Last I checked they were all proprietary (like nistune's - not that there is anything wrong with that), but if you have come up with a design I would encourage you to post it up/LGPL/FreeBSD it. Other than that, all I know is that Nistune supports (I think) S14/ODBII ecus, and I would contact them for help, sorry !